How to Replace a Saab 9-3 Key

The saab key programming 9-3 is a car that has a large variety of appeal to drivers. It has a powerful engine as well as good visibility. It has a high safety rating.

It is important that you have two keys that work for your vehicle. It can be costly to replace a key if you lose it.

how to open a saab 93 Without a key to Replace the Ignition Key on a Saab 9-3

If your car’s key doesn’t engage in the ignition it is time to replace it. This guide will guide you through the steps to do it on a Saab 9-3. You will need to replace the key, purchase an updated reprogrammable phone, and then purchase a new casing for How to open a Saab 93 Without a key your key-fob.

The majority of modern Saab models make use of transponders instead of a key made of metal to unlock the car and start it. The rechargeable batteries contained in the key-fob get worn out, and eventually cannot hold any charge. This is especially true if you keep using the same key for the same lock.

A professional locksmith can replace the battery quickly. You can also do it yourself if have the necessary tools and a little bit of patience. The first step involves separating the key-fob. Insert flatheads into the slot in the middle of your case. The plastic is brittle, and easily damaged.

Once the case has been opened, you can make the new key by combining lower part of the old key with the transponder and banana. This will ensure that the new key is properly paired to your CIM and can be a major difference when replacing the sole key of your Saab 9-3.

How do I replace the ignition Key on a Saab 900

If you don’t have two keys, you will need to remove the dashboard and steering wheel in order to access the ignition. Start by disconnecting the negative battery cable. Once the battery is removed, you can remove all the trim pieces and dashboard pieces that surround the steering wheel. After the dashboard is removed, you can insert a screwdriver through the opening in the back of the ignition switch and remove it.

The ignition cylinder is equipped with a key lock, which can stop the vehicle from starting if you don’t have a key. If your 900’s ignition switch isn’t functioning, check the key to determine whether it’s in the lock or in the ignition barrel. You should also rotate your keys and keep them clean to avoid breaking.

Saab cars differ from other cars because they don’t use traditional metal keys. Instead, the car is able to recognize electric signals from the key fob via the use of a specific microchip.

If you lose just one working key fob your dealer will charge you a premium to replace your computer module (also known as the CIM). We can however reprogram your existing computer EEPROM and prepare it to accept new keys without replacing it. You’ll save more than 50% off the dealer’s price! We call it the SAAB Key PROGRAM. Find out more about it here!

How to Replace the Ignition Key in a Saab9-5

The metal component of a traditional Saab key is simple to duplicate, and it’s not a major obstacle against theft of a vehicle. The real security comes from the electronic part in the key-fob, which is equipped with a chip which recognizes your car once it is inserted into the ignition switch.

Saab has relied on the technology of this anti-theft device for more than 10 years. It’s not as effective as a physical lock for your door but it does make stealing your car more difficult. This is why every Saab owner should always keep a spare key on hand.

Most new Saabs come with two keys right from the factory. However, you can upgrade them at a dealer through a special handheld computer known as a Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception to this is the NG 9-3 models, with more modern, more advanced features that require the use of a key-fob.

The dealer will replace the CIM or TWICE module in those vehicles if all keys are lost saab key. They’ll charge you a high price for doing it. We can however reprogram the EEPROM on your computer and prepare it to accept new keys, and not replace the expensive modules.

How to replace the ignition Key on the Saab XC90

It’s probably time to replace your SAAB key fob if it is having difficulty turning the barrel of your lock. The process is fairly simple and you don’t even need to visit a dealership. Instead you can do it yourself at home with only a few tools.

First, you’ll need to prepare the new key. Before you start, disable the anti-theft by placing blocks under your rear wheels, and then releasing your handbrake. Next, put the key in the ignition and move it to the on position that activates the accessories but it does not start the engine. Repeat this five times, and then put the key in the “on” position.

Next, you’ll need to find a new case for your old key fob. They can be found at any auto parts shop, and they’re typically quite affordable. Based on the model, you may even get them without any electronics.

To open the case simply push the flathead screwdriver into the slot in the middle. The case will break easily, and how to Open a saab 93 without A key once you do, you’ll have access to the internal electronics. To remove the electronics, employ a small screwdriver, and try to pry them out gently.