Window Repairs

Window repairs can save homeowners money and help keep their homes warm. In the event of severe damages such as broken glass or window repair a damaged frame, a window replacement could be necessary.

But there are many other issues that can be addressed to extend the lifespan of your windows. Some common problems include:

Broken or cracked panes

It’s a rock that’s been thrown by your lawnmower or a tree branch blown by high winds, cracked windows are not just visually unappealing, but also can result in more expensive electricity bills because the broken pieces allow cold air into your home. Luckily, it’s typically easy to fix windows with broken panes.

Begin by carefully removing glass using gloves and glasses. You may need to employ a utility knife to remove any remaining putty or old glazing compound that has accumulated around the edges of the frame. Next, wipe down the surface of the glass and the frame’s wood using a soft cloth or paper towel.

Once the frame is clean then apply a waterproof silicone caulking around the frame’s perimeter. This will stop water from entering through the crack, which can cause further damage to both the frame and the glass.

A bad crack in double glazing repairs-paned glass could cause gas to leak between the panes, rendering your windows less efficient in insulating. If the crack is severe enough that it threatens the integrity of the window or if the inner pane is missing you might need to call a professional.

Thermal stress cracks may also occur when there is an extreme temperature difference both inside and outside your home. This causes the glass to expand and shrink. If the cracks are located on two sides of a glass, it is recommended to replace it instead of attempt to repair it.

Clear tape can be used to close cracks in windows that are not yet ready for replacement. It also keeps out bugs and cold wind. You can also cut an area of nylon stocking or tarp sufficient to cover the crack and stick it to the wall using duct tape. This is not a permanent fix, but it will keep insects out and cold air away from your home. If your windows are old and you’re beginning to notice cracks in the glass It’s a good idea to check with your local window manufacturer to determine if replacing the entire window would be a better option for you.

Rotten Wood

Wood rot is a common problem for windows. It can affect the appearance of a house and can also be a safety risk. However, it is possible to repair rotted wood. You will first need to determine the root of the wood’s rot. Examine for leaks in the roof and other places where water can enter the wood.

You’ll then have to remove the rotten parts of the window frame. This can be accomplished with the claw hammer, chisel, or rasp. After you have removed the decayed wood, you’ll need to replace it with fresh wood. Pre-treated wood is suggested for this project since it will resist the onset of rot. If you cannot replace the timber that has rotted, you can use wood hardener and filler to reinforce the damaged area. The majority of hardware stores have this type of product. To get the best results, adhere to the instructions on the label.

After you have repaired the damaged areas of the window sill, it is essential to safeguard the area. Apply a water-resistant sealant the wood. A product like Sikkens is a good choice for this task.

You can also use an epoxy filler that is two-part to protect the wood from further damage. It is easy to apply and leaves a nice finish. However, it’s important that you follow the application instructions on the label. Once the epoxy filler has dried it is possible to sand the surface of the wooden. It is best to begin with a rough grade of sandpaper before moving to a smoother grade.

You don’t want to expose the rotted part to more moisture. It is therefore an ideal idea to cover the repaired area with an oil-based primer which will protect it from moisture. After that, you can apply the wood sealant that is waterproof.

The W won’t open

There are a variety of reasons windows don’t open. Wood frames can warp during rainy weather, or the house could have settled or someone might have closed it to protect themselves. With a little patience and the right tools you can open most stuck windows.

One of the main causes of windows that isn’t able to open is the accumulation of gunk or debris on its moving parts. Acme Glass notes that dirt and grime accumulates over time on hinges, sliding tracks and locks. Additionally, window repair metal hardware may rust when it comes into contact with humidity and direct sunlight. Maintaining these areas lubricated by spray grease can prevent oxidation and keep your window working correctly.

The pulleys that raise or lower the window may be loosened, or break. These components may lose tension and get blocked especially when the window is at least two stories above the ground.

If you’re having trouble opening windows, try using a pry bar to gently push the window open a little at one time. Put a block in the frame of the window to give the pry bar more leverage. Be careful not to damage either the wood or the Window repair. Try applying a hairdryer along the frame’s edges for a few minutes. This will warm the wood, making it easier to move.

A faulty spring can also be the cause of windows that aren’t able to lift or lower. Based on the manufacturer of the windows, you’ll need to refer to the owner’s manual for additional instructions.

If you’ve tried cleaning and lubricating the moving components on your windows, but they won’t open, then it’s probably time to replace windows. Homespire Windows & Doors provides energy-efficient replacement windows. Don’t let windows in your home become functional to unusable. If your windows aren’t properly shut could leave your home vulnerable for water damage and burglary. Contact us today for more information about our replacement windows and our services!