Double Glazing Door Lock Repairs

Are your uPVC door or window mechanism faulty? Perhaps the handles on your uPVC windows or doors aren’t aligned correctly or are difficult to operate.

You will lose energy if your double-glazed doors don’t function properly. This can also increase the risk of burglary. Owen the Locksmith can repair your door lock for an affordable price.

Snapped Key

It can be a hassle when a key snaps inside the lock. It also poses a security risk, as the door might not lock and could leave you open to intrusion. There are fortunately quick fixes you can use to solve the problem and get your door functioning properly once more.

First, remember to stay calm. If you panic and begin doing a lot of fumbling around, you might just end up pushing the damaged piece of the key even further into the lock, thereby making the situation even more difficult.

Spray WD-40, or another penetrating lubricant into the lock. This will help the broken piece to be removed more easily. You can also use the screwdriver to break any pieces stuck. If you happen to have a small piece of the key sticking out and you want to remove it, make use of a paperclip, or any other thin metal object to grab it and pull it out. Both methods work, but you must be careful not to push the broken key further into the keyway.

Some paperclips have grooved edges that could work in a pinch as a hook extractor and Jigsaw blades can also be used for this purpose. If you do not have any of these handy, you can make use of needle-nose pliers to bend them and create a hook. Finally, a pair of tweezers can be used to grip and remove the remaining piece of the key that was broken.

If you can’t get the broken piece of key out, you can try using a lock de-icer. It is available in most hardware stores and works by freezing any moisture that may be present within the lock.

If none of these tricks appear to be working then it’s probably the time to contact locksmith. Fitlocks experts can quickly fix problems with uPVC door locks and mechanisms that have snapped keys as well as broken handles. They can also alter your double glazing door mechanisms to allow them to operate more easily. You can request repairs to your double-glazing online or call us to discuss your needs.

Broken Cylinder

A damaged cylinder poses a serious security threat. A locksmith professional can fix the cylinder. To fix the cylinder, a locksmith will need to tap it. They can do this with an hammer or another tool, but the most efficient method is to use an extended match or piece of wire. Then, position the match’s tip or wire close to the keyway. The locksmith will then strike the lock to crack it. This is more secure than using the hammer, which could harm the lock.

Overheating is the main reason for cylinder heads to crack. This can happen when the block and the cylinder head are made of various metals, such as cast-iron or aluminum. Different metals can heat up and cool off at different rates. This could cause localized hotspots to expand more quickly than the rest of the cylinder.

Corrosion can be a reason for fractures in cylinders. If the head and block of the cylinder are not maintained correctly they may corrosion or rust, which can cause them to expand more than anticipated. In time, double Glazing this could also cause cracks.

If your uPVC door or window lock is stiff or requires an enormous amount of pressure to turn, it could be due to several things. This issue could result from a defective locking mechanism or misalignment or a worn-out handle.

Fortunately, this is an easy and inexpensive fix for most double glazing owners. A professional locksmith will usually be able to solve the issue within an hour of arriving at your property. Depending on the needs of your home they can change the locking mechanism, replace the window handles, and also change the gearboxes. A professional locksmith will be able to inform you on the most cost-effective solutions for your home. They can even suggest upgrades to the highest-security 3 Star Euro cylinders, TS007, that will provide an extra layer of protection against burglars. This is a small cost to pay for the security that comes from knowing your uPVC doors are safe.

Broken Handle

Window handle locks are complex mechanisms that wear out with time and usage, so it’s no surprise that they can break. It isn’t always easy to pinpoint the reason behind a broken window handle lock and repair it correctly.

Fixing the broken handle, whether it’s an internal locking mechanism or latch will increase the security of your uPVC door and stop draughts. It can be expensive to replace or repair your handle if it is not done correctly and can also damage the frame and the lock of your door.

Screwdriver: With the window open remove the screw that holds the handle. This should be located on the inside face of the back plate, double glazing normally concealed by an aesthetically pleasing cover for the screw reasons. It is important to not lose any internal parts of the handle like the plates and levers on either side. Keep them in the same order so that it is easier to replace if necessary.

Then, rotate the handle until it’s 90 degrees to the window frame. Finally, loosen the screw on the back of the handle that holds it to the internal spindle by using a second screwdriver. Once this is loose, you should be capable of pulling the handle off and take out the broken spindle. Replace it with a new spindle, making sure it’s the same length (you can buy them on the internet or at hardware stores). Securely screw it in the frame. Don’t over tighten the screw because this could harm the handle as well as the window frame.

Close the handle and test it. It should operate smoothly and you’ll be able open your window doctor once more.

While you’re working on the handle, don’t forget to ensure that your uPVC windows are shut correctly. If they’re not closing properly, you could experience draughts or damp in your home. You could also compromise the energy efficiency of your home. A local window company, like Core Sash Windows, will be in a position to adjust the hinges on your window frames to ensure they shut correctly.

Broken Spindle

It is often the case that the spindle within a handle breaks rather than the handle itself. This is particularly common with uPVC tilt-and-turn windows. These windows require a handle to operate a locking device in the window frame. The handle is attached to a centre rod that triggers a set of mushroom-like locking cams, these lock into window frame keeps. If the dead latch mechanism does not open when the handle is turned it is possible that the spindle is broken This can be a frustrating problem.

There are ways to fix this issue. A reputable locksmith can swiftly and effectively fix the issue. They will be able to remove the window handle using a tool that can remove the wheel part of the mechanism that is where the spindle is. This can be done without causing any damage to the handle or causing any other damage to the frame of the window.

Once the wheel has been removed, the technician can inspect the spindle and determine what caused it to break. This involves disassembling the spindle, and then examining each component, noting any damage or excessive wear. This process is typically done in a clean, well-lit room by skilled technicians.

Next, clean the damaged spindle. This will remove any dirt or debris which may be obstructing it from operating normally. The spindle can be repaired or replaced. If it is replaced, the technician can take a dowel of a similar size to the original and drill mating holes into both pieces of the spindle. This will ensure that the spindle fits perfectly with the handle.

If the damaged spindle cannot be repaired, it could need to be replaced entirely. Home centers sell generic replacements, but If the style of your window is rare then it is necessary to speak with a woodworker or cabinet maker who can make the exact model for you. After the spindle is installed, it is attached to the handle. The screw holes on the handle to the screws that are already in the frame. Once the new handle is seated you will be ready to operate your uPVC window.